Satellite Television

Satellite television is television delivered by the means of communications satellite and received by a satellite dish and set-top box. In many areas of the world it provides a wide range of channels and services, often to areas that are not serviced by terrestrial or cable providers.

The first satellite television signal was relayed from Europe to the Telstar satellite over North America in 1962. There are three primary types of satellite television usage: reception direct by the viewer, reception by local television affiliates for distribution across terrestrial cable systems.

Satellite television, like other communications relayed by satellite, starts with a transmitting antenna located at an uplink facility. Uplink satellite dishes are very large, as much as 9 to 12 meters (30 to 40 feet) in diameter. The uplink dish is pointed toward a specific satellite and the uplinked signals are transmitted within a specific frequency range, so as to be received by one of the transponders tuned to that frequency range aboard that satellite. The leg of the signal path from the satellite to the receiving Earth station is called the downlink.

A satellite dish is just a special kind of antenna designed to focus on a specific broadcast source. The standard dish consists of a parabolic (bowl-shaped) surface and a central feed horn. To transmit a signal, a controller sends it through the horn, and the dish focuses the signal into a relatively narrow beam. The dish on the receiving end can’t transmit information; it can only receive it. The receiving dish works in the exact opposite way of the transmitter. When a beam hits the curved dish, the parabola shape reflects the radio signal inward onto a particular point, just like a concave mirror focuses light onto a particular point. The curved dish focuses incoming radio waves onto the feed horn. In this case, the point is the dish’s feed horn, which passes the signal onto the receiving equipment. In an ideal setup, there aren’t any major obstacles between the satellite and the dish, so the dish receives a clear signal. In some systems, the dish needs to pick up signals from two or more satellites at the same time. The satellites may be close enough together that a regular dish with a single horn can pick up signals from both. This compromises quality somewhat, because the dish isn’t aimed directly at one or more of the satellites. A new dish design uses two or more horns to pick up different satellite signals. As the beams from different satellites hit the curved dish, they reflect at different angles so that one beam hits one of the horns and another beam hits a different horn. The central element in the feed horn is the low noise blockdown converter, or LNB. The LNB amplifies the signal bouncing off the dish and filters out the noise (signals not carrying programming). The LNB passes the amplified, filtered signal to the satellite receiver inside the viewer’s house.

The end component in the entire satellite TV system is the receiver. The receiver has four essential jobs: It de-scrambles the encrypted signal. In order to unlock the signal, the receiver needs the proper decoder chip for that programming package. The provider can communicate with the chip, via the satellite signal, to make necessary adjustments to its decoding programs. The provider may occasionally send signals that disrupt illegal de-scramblers, as an electronic counter measure (ECM) against illegal users. It takes the digital MPEG-2 signal and converts it into an analog format that a standard television can recognize. Since the receiver spits out only one channel at a time, you can’t tape one program and watch another. You also can’t watch two different programs on two TVs hooked up to the same receiver. In order to do these things, which are standard on conventional cable, you need to buy an additional receiver. Some receivers have a number of other features as well. They pick up a programming schedule signal from the provider and present this information in an onscreen programming guide. Many receivers have parental lock-out options, and some have built-in Digital Video Recorders (DVRs), which let you pause live television or record it on a hard drive. While digital broadcast satellite service is still lacking some of the basic features of conventional cable (the ability to easily split signals between different TVs and VCRs, for example), varied programming selection and extended service areas are features now seen as an alternative.