double arrow

I-стекло (и-стекло) - энергосберегающее низкоэмиссионное стекло Double Low-Е (мягкое покрытие)

Следующим серьезным шагом в изготовлении энергосберегающих стекол стало появление на рынке стекольной промышленности I-стекла, по своим характеристикам превосходящего вышеописанное k-стекло. Отличия между И-стеклом и К-стеклом заключаются как в технологии производства, так и в значении коэффициента излучательной способности (Е). Получение i-стекла предполагает нанесение на его поверхность оптического низкоэмиссионного покрытия на основе окислов металлов с использованием высоковакуумного производственного оборудования, оснащенного системой магнетронного распыления. Низкоэмиссионное Double Low-Е покрытие и-стекла толщиной в несколько десятков нанометров прозрачно, обладает великолепной светопропускающей способностью и еще более низким (Е=0,04) коэффициентом излучательной способности в сравнении с К-стеклом. Применение стеклопакетов с I-стеклом в составе позволяет не только добиться снижения энергозатрат, но и заметно повысить комфорт в помещении. За время отопительного сезона энергосберегающий эффект от оконной конструкции средних размеров, остекленной стеклопакетами с I-стеклом в составе эквивалентен сжиганию жидкого топлива (мазут, солярка) общей массой до 300кг. Недостатком I-стекла в сравнении с К-стеклом является его пониженная абразивная стойкость, что представляет определенные затруднения при транспортировке. Однако, с учетом того, что энергосберегающее покрытие и-стекла всегда располагают внутрь стеклопакета, данный недостаток не сказывается на эксплуатационных характеристиках i-стекла.

Применение энергосберегающих стекол, выводы и предпосылки:

  • однокамерный стеклопакет с любым (к-стекло, и-стекло) низкоэмиссионным стеклом обладает большим эффектом энергосбережения, чем двухкамерный стеклопакет с обычными стеклами;
  • однокамерный стеклопакет с энергосберегающим стеклом легче двухкамерного на 10 кг/м2 (при толщине стекла – 4мм), что обеспечивает более продолжительный срок эксплуатации оконного переплета и уменьшает нагрузку на оконную фурнитуру;
  • однокамерный стеклопакет с низкоэмиссионным имеет даже большее светопропускание, чем двухкамерный с обычными стеклами;
  • при массовом производстве цена однокамерного стеклопакета с энергосберегающим стеклом в составе практически не отличается от цены двухкамерного с обычными стеклами.
Low-E Glass
Nowadays pursuing large daylighting glass area in architectural design becomes popular, and Low-E glass is widely used for energy efficiency consideration. CSG is the first manufacturer of Low-E glass in China. The Low-E glass produced by CSG is outstanding in energy efficiency and in aesthetics with various colors, thus being the primary choice in architectural design. According to the structure of Low-E coating, Low-E glass may be classified as single silver Low-E glass, double silver Low-E glass and so on.
  • Single Silver Low-E Glass Within the coating structure of single silver Low-E glass, there is one silver layer. Single Silver Low-E glass has been widely used in various buildings at different locations worldwide.
  • Features Visible light transmittance— adequate indoor natural daylighting. Solar energy transmittance — a wide range of shading coefficient SC available, for different geological locations. High far infrared reflectance — low U-value, reduced thermal transfer due to temperature difference.
  • Double Silver Low-E Glass Within the coating structure of double silver Low-E glass, there are two silver layers. While maintaining the same visible light transmittance, it has lower shading coefficient, SC, than single silver Low-E glass. In other words, it filters the sunshine as a cool lighting source to a larger extent and provides a solution to energy efficiency in design of high transparency architectures.
  • Features Higher visible light transmittance — ensuring better natural lighting Extremely low solar heat transmittance — effectively impeding solar heat radiation.
Magnetron Sputtering Coating Line with 32 cathodes The differences among various types of glass is reflected in their spectral data as shown in the following figure
  • Triple Silver Low-E GlassWithin the coating structure of triple silver Low-E glass, there are three silver layers. As a result, triple silver Low-E glass performs better against solar heat than double silver Low-E glass and is currently the best silver based Low-E glass in terms of high visible light transmission and energy efficiency. Triple silver Low-E glass is suited for high transparency buildings with special solar shading requirement.
  • Bendable and Post-Temparable Low-E Glass Ordinary Low-E glass cannot be bent and post-tempered after coating which limits larger scale application of Low-E glass and promotion of energy efficient buildings. In view of the prevailing conditions and economic development in China, CSG has researched and developed Low-E coatings made of new materials which can be bent and post-tempered after coating to meet the need of curved Low-E glass in current architectural design practice. The new Low-E glass has been widely used in a number of large buildings home and abroad. CSG has established a sound foundation for popularization of Low-E glass and made new contribution to the undertaking of energy efficient buildings in China.
  • Features Can be bent and post-tempered after coating. Has optical properties and energy efficiency as ordinary Low-E glass.
  • Specifications Dimensions of standard sheet (mm): 2440x3660, 2400x3300, 2100x3300 Maximum dimension(mm): 3300x6000 Minimum dimension(mm): 300 x 800 Thickness(mm): 3, 4, 5, 6, 8, 10, 12, 15, 19 The other thicknesses and sizes may be available upon request.
  • Quality Conforming to GB/T18915.2, the Chinese standard.
  • Notes for use Acoustic and thermal insulation: Filling argon (Ar) in the Cavity of insulating glass may further lower the U-value, and raise the sound reduction index, Rw. Detailed data is available from the sale offices of CSG.
Prevention of thermal breakage: When products with solar energy absorbance approaching to or above 70% are selected, it is recommended that the products be tempered or heat-strengthened to prevent breaking due to thermal stress. Selection of color: The colors listed in the performance data table are outdoor natural reflective colors. When the background color changes, the observed reflective color may also change accordingly, therefore, the products should be observed at different locations from different angles for color selection.

Понравилась статья? Добавь ее в закладку (CTRL+D) и не забудь поделиться с друзьями:  



Сейчас читают про: